Eurorepar
Eurorepar
Eurorepar
PRODUCT BENEFITS

PRODUCT BENEFITS

  • Excellent resistance to outside influences (heat, dust, abrasion, moisture) = reduced risk of corrosion
  • Reduced pedal effort and vibrations, driving comfort
  • Lighter than a mechanical system
  • Extensive range for European and Asian applications

Eurorepar
TECHNICAL CHARACTERISTICS

TECHNICAL CHARACTERISTICS

 

The concentric slave cylinder combines the slave cylinder and mechanical clutch release bearing functions, and consists of :

  • piston operated by the hydraulic circuit,
  • body with a piston guide and gaskets,
  • A preloading spring,
  • clutch release system (with bearings) serving as the interface with the clutch,
  • connection point for connection with the hydraulic circuit

The concentric slave cylinder bearing is always self-centring.

Eurorepar
CONDITIONS OF REPLACEMENT

CONDITIONS OF REPLACEMENT

  • Like a conventional release mechanism, a CSC is fitted with a bearing. As this is a wearing part, the CSC must be replaced whenever the clutch is replaced
  • You are advised to check the CSC if it is difficult to change gear, there is a cracking sound, the pedal is soft or depressed or there is a leak from the hydraulic circuit (if the hydraulic fluid has contaminated the clutch, the entire assembly must be replaced).

Before any operation: 

  • Consult the manufacturer’s manual
  • Check that the surface of the gearbox/CSC assembly is clean and in good condition
  • Avoid activating the CSC when empty and/or before assembly
  • Bleed the hydraulic circuit after assembly (absence of air and/or residue of old material).

In the same category

In the same category

Eurorepar
Accessories Belts

423 accessories belts. ...

Eurorepar
Clutch Kits

3P Kit: the all-in-one...

Eurorepar
Accessory Belt Kits

An ALL- IN- ONE box with...